Using Your Washer - Whirlpool Cabrio WTW7800XL0 Use And Care Manual

TROUBLESHOOTING
Sand, pet hair, lint, etc.
on load after washing
Load is tangling
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
Wash action and/or spin speed too
fast for load.
Not cleaning or Wash load not completely
removing stains covered in water.
Added more water to washer.
Washer not loaded as recommended.
Odors
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
Monthly maintenance not done as
recommended.
Not using HE detergent or using too
much HE detergent.
Add an Extra Rinse to the selected cycle.
Load garments in loose heaps evenly around the basket wall.
Do not load above the stainless steel portion of the basket.
See "Using Your Washer".
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Select a cycle with a slower wash action and spin speed.
Note that items will be wetter than when using a higher
speed spin.
Washer senses load size and adds correct amount of water.
This is normal and necessary for clothes to move.
Do not add additional water to washer. Additional water lifts the
laundry off the impeller, resulting in less cleaning.
Load garments in loose heaps evenly around the basket wall.
Do not load above maximum recommended load height. See
"Using Your Washer".
Load with dry items only.
Add only 1 or 2 garments after washer has started.
The suds from regular detergent can cause the washer to
operate incorrectly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow detergent directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Whites and Heavy Duty cycle for tough cleaning.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly to load.
Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
Run the Clean Washer cycle with AFFRESH
TM
monthly.
See "Cleaning Your Washer" in Washer Maintenance.
Unload washer as soon as cycle is complete.
Use only HE detergent. Be sure to measure correctly.
Always follow the manufacturer's directions.
See "Cleaning your Washer" section.
J
16