Table of Contents
Advertisement
Building
in your microwave oven
Your microwave
oven is not limited
to carts, counters or tables. Custom installations
are made
easy with kits available
from your dealer.
t. Build the microwave
oven into a cabinet
or
wall by itself or over built-in single ovens in the
Whirlpool
RDE. REE, R GE,RB and SB model series or
Imperial
7200 single gas ovens.
2. Attach the microwave
oven to a wall by itself
or with cabinets
over it.
3. Put the microwave
oven on the MICRO SHELF_'
Hood over a cooktop.
The hood is available
ducted
or as a recirculating
hood, and includes
cooktop
lights
Ask your dealer
for details on...
• 832987 - 30-inch
Built-in Kit
• 832989 - 24-inch Built-in Kit
• 832991 - 27-inch Built-in Kit
• 832993 - Wall Mounting
Kit
• RH3330XR - MICRO SHELF" Hood
Use only approved
installation
kits.
Obtain these kits from your authorized
Whirlpool
dealer.
Caring for your microwave oven
Cleaning
the microwave oven
Wipe
often
with
warm
sudsy
water
and
a soft cloth
or
sponge
For stubborn
soil, boil a cup
of water
in the oven
for 2 or 3
m_nutes. Steam
will soften
the soil
Be sure to clean
the areas
where the door and oven
frame touch when closed.
When cleaning
surfaces of
door and oven that come to-
gether on closing
the door,
use only mild, non-abrasive
soaps or detergents
applied
with a sponge
or soft cloth.
Rinse well.
Caution:
Abrasive
cleansers,
steel wool pads, gritty wash cloths, etc, can damage
the control
panel, electronics,
and the interior and exterior oven surfaces
Use a soft cloth or a
sponge
with a mild detergent
or spray glass cleaner
Replacing
the light bulb
The microwave
oven light should come
on whenever
the door is opened
or the oven is operating,
To replace:
Light B ulb
Cover
I.
Unplug, or turn off at fuse box or circuit
breaker.
"_. Open the oven door.
3. Remove the 3 screws from the front of the
stirrer cover.
4. Pull down the front portion
of the cover.
[It is creased
across its width to form a hinge.]
5. Replace
bulb with a 25-watt candelabra
Case bulb [FSP 313760]. Obtain
bulb from
your authorized
Whirlpool
dealer.
6. Close the cover and replace
the screws
7. Plug in, or turn on the main power supply.
Advertisement
Table of Contents
