Building In Your Microwave; Cleaning The Microwave; Oven - Whirlpool MW8500XP Use & Care Manual

Whirlpool microwave oven use & care guide mw8500xp
Hide thumbs Also See for MW8500XP:
Table of Contents

Advertisement

Building
in your microwave oven
Your microwave
oven is not limited to carts, counters
or tables. Custom installations
are made
easy with kits available
from your dealer.
1.
Build the microwave
oven into a cabinet
or
wall by itself or over built-in single ovens in the
Whirlpool
RDE, REE, RGE. RB and SB model series or
Imperial
7200 single gas ovens
2. Attach the microwave
oven to a wall by itself
or with cabinets
over It.
Ask your dealer
for details on...
l
RCK803 (832849) -30-inch
Built-in Kit
l
RCK805 (832856) -253/d-inch
Buitt-in Kit
l
RCK807 [832850) -27-inch
Built-in Kit
l
RCK710 (832763) - Wall Mount Kit
l
RCKBII (832875) --Wall Mount Vent Grille
and Filter Kit
3. Put the mrcrowave
oven on the MICRO SHELF@>
l
RCK713 (832940) -Wall
Mount Cookbook
Hood over a cooktop
The hood IS available
Storage Cabinet
ducted
or as a recrrculating
hood, and includes
. RH3330XL - MICRO SHELF@ Hood
cooktop
lights
l
RCK902 (832873) -Storage
Cabinet
for
use with MICRO SHELF@ Hood
Caring for your microwave oven
Cleaning the microwave oven
Wipe often with warm sudsy
water and a soft cloth or
sponge
For stubborn
soil. boil a cup
of water in the oven for 2 or 3
minutes Steam will soften
the soil
Be sure to clean the areas
where the door and oven
frame touch when closed
When cleaning
SUrfaCeS of
door and oven that come to
gether on closing
the door,
use only mild, non-abrasive
soaps or detergents
applied
with a sponge
or soft cloth
Rinse well
Caution:
Abrasive
cleansers,
steel wool pads, gritty wash cloths, etc can damage
the control
panel and the interior and exterior oven surfaces
Use a soft cloth or a sponge
with a mtld
detergent
or spray glass cleaner
Replacing the light bulb
1.
Unplug the power cord.
2. Remove holding
screw on
access panel.
3. Remove the light bulb from
its socket.
4. Replace
bulb with a 40-
watt appliance
bulb.
5. Replace
the access
panel
and holding
screw.
6.
Plug in the power cord.
18
light
Bulb
Access
Panel

Advertisement

Table of Contents
loading

Table of Contents