Table of Contents
Advertisement
÷
bbing a tape onto a disc
You can record video or audio on
a video tape onto a disc.
Preparation:
,, Turn ON the TV and set to the video input mode.
,, Load a source video tape and a disc for recording.
,, Remove the erase protection tab of the source video tape to prevent
the data from accidentally being erased.
,, Confirm the disc space before operation.
1
2
3
Press DVD to set this unit to DVD mode.
The DVD indicator will light.
Press REC MODE/SPEED
and select the recording mode.
,, When REC MODE/SPEED
is pressed each time, "SP", "LP",
"SLP" or "XP" is selected in this order.
,, The recording mode is indicated on both the TV screen and the
display window.
,, For the details of the recording mode, see page 52.
Press VCR and set the unit to VCR mode.
VCR
,/
NOTE:
Confirm that the VCR indicator lights.
4
5
Press DUBBING.
,, The unit is changed to DVD mode automatically.
,, The VCR is waiting for playback and the DVD is waiting for re-
cording. Then the following message will appear.
Press DUBBING,
or press _
or _ to select
"YES" and press
ENTER.
Dubbing starts.
,, To cancel dubbing, press STOP, or select "NO" and press EN-
TER.
÷
NOTES:
,, Dubbing cannot be accomplished
when
- a copy protected tape is used.
- disc protection is set.
- disc has no recording space.
,, Dubbing stops when
- the video tape is played back to
the end and stops.
- recording space becomes full.
,, The videos recorded from TV pro-
grams or movies can be used only
for your personal enjoyment with-
out permission
of the copyright
holder.
76
6
In dubbing, VCR playback, DVD recording and "dub" (dubbing)
indicator appear on the display window.
To stop dubbing, press STOP.
8
DVD
o
/
L
_ _
O U U
•
Video playback
DVD recording
2G00101A
P70-P78
76
_
3/7/05, 5:16 PM
Advertisement
Table of Contents
