Chapter 5: Usingthe Tv's Features; Selectingthe Videoinputsource To View; Labeling The Vide() Input Sources - Toshiba 32HLV66 Operating Manual

Selectingthe videoinputsource
to view
To select the video input source to view:
1
2
Press _)
on the remote control or INPUT on the TV
control panel.
To select the input: Press 0-7 to select the input source
you want to view:
a) You can select the video input which will depend on the
input terminals you used to connect your devices
(_'_ Installation Guide).
The current signal source displays in the top right
corner of the Input Selection screen.
BuiJt-ln DVD
Video 1
Video 2
ColorSkeam HD1
_P ColorSkeam HD2
HDMI
0 PC
0 - _ I _ to Select
b) Repeatedly press •V on the remote control (or
GHANNI::L •V on the control panel) to change the
input; or
c) Repeatedly press @ on the remote control or INPUT
on the TV control panel to change the input.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(_ "Labeling the video input sources" at right).
• The source can be "hidden" (r_ "Labeling the video input
sources" at right).
Labelingthe videoinputsources
You can label each video input source according to the type of
device you connected to each source, from the following preset
list of labels:
- - (d_fault label)
Cable
DTV
Satellite/DSS
VCR
Laser Disk
DVD
HD DVD
Audio Receiver
Compact Disc
Video Recorder
Game Console
Hide (to hide an unused input in the Input Selection screen)
Note: tf you select PC in the Input Selection screen, you can
choose
only "- -," "Hide,"
or "Game Console" as the label.
To label the video input sources:
NN MENU
Pl-e.'.' (-) and open the Preferences menu.
2 Highlight Input Labeling and press,_.
3 Press • orV to highlight the video source you want to
label.
g_ 4,t m , g
VOR
Video 2 Cable
4
Press • or • to select the desired label for that input
source. [fa particular input is not used, you can select
Hide as the label, which will cause that input to be
"grayed out" in the Input Selection screen and skipped
over when you press _ on the remote control.
5 To save the new input labels, highlight Done and press
To revert to the factory default labels, highlight Reset
and press ,_.
23