Contents - Toshiba SD-V393SU Owner's Manual

O.[Ib-
0 0 C_ 0
VCR DVD
-- POWER
OPEN/CLOSE
_ A/T/._/_-
................ ENTER
STOP
PLAY
--
PAUSE/STEP
m
m
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About C_ _ Cc-o_
The C__,_C__--_ icons on the heading bar show the playable discs for the
function described under that heading.
_ You can use this function with DVD video discs.
<_ You can use this function with Video CDs.
@_ You can use this function with Audio CDs and CD-R/RW CDs.
÷
[] To pause playback (still mode)
Press PAUSE/STEP during playback.
PAUSE/STEP To resume normal playback, press
PLAY.
• The sound is muted during still
mode.
[] To stop playback
Press STOP.
STOP
[] To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
OPEN/CLOSE
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
[] Playing a Disc while the VCR section is recording
or standing by for timer recording
1) Start to record.
Follow steps 1_5 on page 34.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
2) Press VCR DVD selector to select DVD mode.
3) Play a disc.
Follow steps 3 _ 5 on page 42.
• Press PLAY if the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
Press STOP to stop play back a disc.
[] Screen saver function
The screen saver operates when you leave the unit in
DVD stop mode for approx, five minutes.
The screen will repeatedly get dark gradually and back
to normal.
w
,<
"6
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again _ _.
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
"Reading" will appear on the display for a few minutes and then "Incorrect Disc" will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 51.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to
the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the
unit to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
43
2H20101A (E)p42-45 43 _ 2/10/05, 7:33 PM