Toshiba SD-V393SU Owner's Manual page 26

setting (continued)
If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.
(: c[
--VCR MENU
SET+_
ENTER
CANCEL
÷
EXAMPLE: Setting the clock to "8:30 AM" March, 26
(SAT), 2005.
PressVCR MENU.
VCR MENU
SETUP
Press SET + or - to select "SYSTEM SETUP",
then press ENTER.
Press SET + or - to select "CLOCK SET",
then press ENTER.
Press SET + or-to set the month, then press
ENTER.
Set the day, year and time as in step 4.
After setting the clock, date and time starts
functioning automatically.
into make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or -.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
÷
26
2H 0101A (E)p26-31
26 _ 2/10/05, 7:32 PM