Hide thumbs Also See for SD-2805:
Table of Contents

Advertisement

Check the following guide for the possible cause of a problem before contacting service.
Sym ptom
Cause
Correction
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
The power is on, but
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
the DVD player does
audio CD indicator in the display
not work.
window is lit.)
No picture.
• The TV is not set to receive DVD signal
• Select the appropriate video input mode
output,
on the TV so the picture from the DVD
player appears on the TV screen.
• The video cable is not connected
• Connect the video cable into the jacks
securely,
securely.
• The connected TV power is turned off.
• Turn on the TV.
No sound.
• The equipment connected with the
• Select the correct input mode of the
audio cable is not set to receive DVD
audio receiver so you can listen to the
signal output,
sound from the DVD player.
• The audio cables are not connected
• Connect the audio cable into the jacks
securely,
securely.
• The power of the equipment connected
• Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
• The Digital Audio Output is set to the
• Set the Digital Audio Output to the
wrong position,
correct position, then turn on the DVD
player again by pressing POWER.
The playback picture is
• The disc is dirty.
• Clean the disc.
poor.
The DVD player does
• No disc is inserted.
• Insert a disc. (Check that the DVD, or
not start playback,
audio CD indicator in the DVD display is
lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
The remote control
• The remote control is not pointed at the
• Point the remote control at the remote
does not work properly,
remote sensor of the DVD player,
sensor of the DVD player.
• The remote control is too far from the
• Operate the remote control within about
DVD player.
23 ft (7 m).
• There is an obstacle in the path of the
• Remove the obstacle.
remote control and the DVD player.
• The batteries in the remote control are
• Replace the batteries with new ones.
exhausted.

Advertisement

Table of Contents
loading

Table of Contents