Sharp LC-19DV24U Operation Manual page 10

QUICK REFERENCE
I I II II
tfthe remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two "AA" size batteries
(supplied with the product).
3 Close the battery cover.
- Place the batteries with their terminals /-_z
corresponding to the (+) and (-) _'_,.
indications in the battery compartment. _i,J-.,._.._.7_/_:_
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do notmix old and new batteries. Mixing old and new batteries can shorten the rife of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemica[s that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
- The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
° If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Reen_°pcentr°l _i 3_-_0_
IMPORTANT:
The POWER indicator on the television should fight GREEN indicating you have power to the "P,//DVD.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the
power on.
II®®®Q
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-80D-BE-SHARP.
(_-9