Long-Fime Recording (Mdlp); When You Do Not Want "Lp:" Added Automatically At The Beginning Of A Track - Sony MZ-S1 Operating Instructions Manual

26
Long-time recording
(MDLP)
Select each recording mode according 1o
the recording time that you want.
Stereo recording is possible ot 2 times
(LP2) or 4 times (LP4) the normal
(stereo) recording time. Monaural
recording at 2 times normal recording
time is also possible.
MDs recorded in monaural, LP2, or
LP4 mode can be played back only
on MD players or recorders with
monaural, LP2, or LP4 playback
mode.
Control key REC
(VOL +/-/
I
I
MENU/ENTER
1 While the recorder is stopped, press
MENU.
2
Press _ or _ repeatedly until
"R-MODE" flashes in the display,
and then press ENTER.
3 Press _ or _ repeatedly to
select the desired recording mode,
and then press ENTER.
Each time you press _ or I_l,,I, the
display changes as follows:
Recording Display Recording
mode 1) time 3)
SP stereo SP Approx. 80
rain.
LP2 stereo LP2 Approx. 160
rain.
Recording Display Recording
mode I ) time 3)
LP4 stereo LP4 Approx. 320
rain.
Monaural 2/ MONO Approx. 160
rain.
I) For betier sound quality, record ill normal
stereo (SP) or LP2 stereo mode.
z)lf you record a stereo source in monaurM, the
sound from left and right will be mixed.
3) When using an 80-minute recordable MD
4 Press I1_ while pressing REC.
S Play fl_e sound source.
To stop recording, press I.
The recorder remains at the previous
setting of the recording mode when you
record the next time.
When you do not want "LP:"
added automatically at the
beginning of a track
When "LP:" is added to the beginning of a
track, "LP:" is displayed whenever an
3ttempt is m_de to play or edit the disc on
a unit thai does not support MDLP mode.
This display lets you know the1 playback
or editing of 1he track is not possible on
the machine being used. The recorder is
factory set to add "LP:" 3t the start of
each track.
1 While the recorder is stopped, press
MENU.
2
Press _ or _ repeatedly until
"OPTION" flashes in the display, and
then press ENTER.
Press _ or _ repeatedly until
"LPStmp" flashes in the display, and
then press ENTER.