Advertisement
QUICK REFERENCE
o Before attaching (or detaching) the stand, unplug the AC
cord.
o Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
o Attach
the stand in the correct
direction.
o Do not remove
the stand from the iV unless using an
optional
wall mount bracket
to mount it.
o Be sure to follow the instructions. Incorrect
installation
of the stand may result in the TV falling
over.
1 Confirm
that there are 12 screws
(all the same size)
supplied
with the stand unit.
????
2 (1) Set the post for the stand unit onto
the box.
(_) Attach the base to the post.
13} Insert and tighten the 8 screws
into the 8 holes
on the bottom
of the base.
o Hold the stand unit securely with one hand, and then tighten
the screws.
®
3 ,'1 Insert the stand
into the openings
on the bottom
of the TV.
,_2} Insert and tighten
the 4 screws
into the 4 holes
on the rear of the TV.
• To detach the stand, perform the steps in reverse order.
"
•
J"
e|
|"
_ .
• This TV should be mounted
on the wall only with the
AN-52AG4
(SHARP} wail mount bracket.
The use of
other wall mount brackets
may resumt in an unstaMe
installation
and may cause serious
injuries.
• Installing
the TV requires
special
skill that should
only be performed
by qualified
service personnel.
Customers should
not attempt
to do the work
themselves.
SHARP bears no responsibility
for
improper
mounting
or mounting
that results
in
accident
or injury.
Using
an optional
bracket
to mount
the TV
• You can ask a qualified
service professional
about
using an optional
AN-52AG4
bracket
to mount the TV
to the wall.
Carefully
read the instructions
that corrle
with the
bracket
before beginning
work.
Hanging
on the wall
AN-52AG4
wall mount
bracket.
(See the bracket
instructions
for details.)
---- ---__........... ----_
Vertical mounting
Angular mounting
About
setting
the
TV angle
015110115120
°
e The center of the display:
......
"
_'s/_4 i nch (12.9 mm} above the "c'
/
position.
* Refer to the operation
manual
of AN-52AG4
for
details.
• Detach the cable clamp on the rear of the TV when using
the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at
the 4 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the
bracket to the rear of the TV.
Advertisement
