Advertisement
On-Screen
Display
Menu
When set to "Enable",
the power will automatically
shut
down
if there is no operation
for 3 hours.
o When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
o "Disable" is the factory preset value.
You can run EZ Setup again, even after setting
up the
preset channels.
Language:
Select from among 3 languages (English,
French and Spanish).
"I_ Location:
Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: "Power Saving"is setto "Advanced", and AV MODE is
set to "STANDARD".
Store: "Power Saving" is setto "Off" and AV MODE isset to
"DYNAMIC(Fixed)".PictureReset and FeatureDemo can be
set.
Picture Reset: AV MODE will beset to "DYNAMIC(Fixed)"
regardless of whether PictureReset is "On" or "Off". Ifyou
select "On", AV MODEwill be reset to "DYNAMIC(Fixed)"
if there is no operationfor 30 minutes.When "Off" is
selected, AV MODEwill be setto "DYNAMIC(Fixed)".
Feature Demo: When "On" isselected, after all the settings
are completed, the Feature Demo screen isdisplayed if
there is no operationfor severalminutes.
ENERGYSTAR qualification isbased onAV MODE
"STANDARD".
Air/Cable:
Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
o See Initial Installation on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try "E7 Setup" again.
o If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
In order to receive
digital air broadcasts,
you need
a digital broadcast
antenna.
You can confirm
the
antenna
configuration
through
the "Antenna
Setup-
DIGITAL"
screen.
If necessary,
adjust
the direction
of
the antenna to obtain the maximum
signal strength.
Signal Strength:
The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel
Strength:
Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
= This function isavailablefor DIGITAL(Air) only.
If Initial Installation
does not memorize
all the channels
in your region,
follow the instructions
below to manually
memorize
the channels.
Air/Cable:
Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
OH Memory:
You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
on: Skips channels.(Channel selectiondisabledusing OR
A/V.)
Off: Doesnot skip channels.(Channel selectionenabledusing
CRA/V.)
Remove Scrambled
OH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes:Starts to removescrambled channels.
No: This function does not work.
o See Initial Installation on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try channel search again.
o If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
This setting
allows you to skip the HDMI or PCqN
Input
("Input 4 (PC)", "Input 5 (HDMI)",
"input 6 (HDMI)" and
"Input 7 (HDMI)") on the Input Selection
operation.
Yes: Skips the input.
Ne: Does not skip input.
Lets you set the input terminal
displayed
when using
the INPUT SOURCE
menu or channel
display.
Press A/V/41/I_
to select the new name for the input
mode.
Using the software
keyboard,
you can enter up to 1 0
characters
for text.
Caps Off/Caps
On/Caps
Lock
If "alphabet" is selected in "Character Set", this
switches characters between uppercase and
lowercase.
Each time you press I=NTER, the character type
switches as shown below:
Caps Off: All the characters are Iowetcased.
Caps On: Only the first character isuppercased.
Caps lock: Allthe characters are uppetcased.
o You cannot change labels ifthe INPUT SOURCE isTV.
20
Advertisement
