Advertisement
Watching
TV
Press POWER
on the TV or on the remote
control
unit to turn the
power
on.
o POWER indicator (Green): TheTV is on.
o The Initial Installation starts when the TV powers on for the first time. If the
TV has been turned on betore, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, pertorm "E, 7 setup" on the Setup
menu on page 20.
Press POWER
on the TV or on the remote
control
unit again to turn the
power
off.
o The TV enters standby and the image on the screen disappears.
o The POWER indicator on the TV turns of/.
POWER
(On/Standby)
o If you are not going to use this TV for a long period of time, be sure to remove
O
O
O
I _
theAC cord from theAC outlet.
o Weak electric power is still consumed even when the TV is tamed of/.
When you turn on the TV for the first time, it will
automatically
memorize
the broadcasting
channels
available
in the region where you live. Perform the
following
steps before you press POWER
on the
remote
control
unit.
1.
Insert the batterbs into the remote control unit. (See page 9.)
2.
Connect the antenna cable to the TV. (See page 9.)
3.
Plug in the AC cord to the AC outlet. (See page 8.)
Language
(Language
setting)
Sebet trom among 3 languages: English, French and Spanish.
1 Press A/Y
to select the desired
language
listed on
the screen,
and then press
ENTER.
o ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable (Antenna
setting}
Make sure what kind ot connection is made with your TV
when selecting "Air" or "Cable".
3 Press _/1_
to select "Air" or "(},able".
Press ENTER
to enter the setting.
CH Search (Channei search}
Channel auto search makes the TV look for all channels
viewable in the set area.
4 When
"Air"
is selected
in Antenna
setting:
Press _/1_
to select "Start", and then press ENTER.
TV Location
Select "Home" or "Store" tot the location where you plan to
install the TV. This product qualifies tot ENERGY STAR in
Home mode detault setting.
2 Press ".9/I_ to select "Home"
or "Store".
Press ENTER
to enter the setting.
When
"CabLe"
is selected
in Antenna
setting:
Press A/_'
to select "Analog
& Digital Seareh
Start"
to search both
analog and digital broadcasts,
or to
select "Analog
Search Start" to search only analog
broadcasts,
and then
press ENTER.
Home:
"Power
Saving"
is set to "Advanced",
and AV
MODE
is set to "STANDARD".
Store:
"Power
Saving"
is set to "Of/" and AV MODE
is set to
"DYNAMIC
(Fixed)". Picture
Reset
and Feature
Demo
can
be set.
Picture
Reset:
AV MODE will be set to "DYNAMIC
(Fixed)"
regardless
of whether
Picture Reset is "On" or "Oft". If you
select "On", AV MODE will be reset to "DYNAMIC
(Fixed)" if
there is no operation
for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC
(Fixed)".
Feature
Demo:
When "On" is selected,
after all the settings
are
corrlpleted,
the Feature Demo
screen is displayed
if there is
no operation
for several minutes.
o The Channel search will start automatically.
o To exit the Channel search screen, select "Cancel", and
then press ENTER.
o If no channel is found, confirm the type ot connection made
with your TV and try "E, 7 Setup" again.
(See page 20.)
o For changing the settings of the Initial Installation, pertorm
"E,7 setup" on the Setup menu on page 20.
12
Advertisement
