Special Installations - Heath Zenith SL-6107 Manual

SPECIAL INSTALLATIONS

For single switch in-
stallations, connect
the wall switch as
shown here.
If you want to have mo-
tion sensors at both
3-way switches, con-
nect them as shown
below. The minimum
wattage may increase
to 100 W for fluores-
cent and 50 W for in-
candescent lighting.
*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different
location, depending on the brand of your switch.
RED is used to represent the second wire between two standard three-way switches. This may not be the
color used in all installation. If you are not sure about your wiring, call an electrician for installation help. There
is also a RED wire on the SL-6107 switch. Check the instructions above closely and do not confuse the two.
SINGLE SWITCH INSTALLATION
BLACK
BLACK
FROM
POWER
OFF
SOURCE
SL-6107
EXISTING LIGHT SWITCH CONFIGURATION
WHITE
FROM
POWER
*COMMON
BLACK
SOURCE
2 SWITCH INSTALLATION
FROM
WHITE
POWER
SOURCE
BROWN
BLACK
RED
OFF AUTO ON
(From 6107)
SL-6107
-8-
BROWN
RED
AUTO ON
WHITE
WHITE
*COMMON
RED
(In Wall)
BLACK
WHITE
BROWN
BLACK
OFF AUTO ON
RED
(From 6107)
RED (In Wall)
BLACK
WHITE
WHITE
BLACK
WHITE
BLACK
BLACK
SL-6107
595-4514-13