Heat Controller RAH-183G Owner's Manual page 10

Owner's Manual
Installation Instructions
1
WINDOW REQUIREMENTS
These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
T he air conditioner can be ins talled
without the accordion panels if needed
to fit in a narrow window. See the
window opening dim ens ions .
All supporting parts must be secured
to firm wood, m as onry or m etal.
T he electrical outlet m us t be within
reach of the power cord.
2 STORM WINDOW REQUIREMENTS
A s torm window fram e will not allow the
air conditioner to tilt toward the outs ide,
and will keep it from draining properly.
To adjus t for this , attach a piece of wood
to the s tool.
WOOD PIECES-
WIDT H: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS : To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
s torm window fram e.
A ttach s ecurely with nails or s crews
provided by the ins taller.
1/2" higher
than fram e
Storm
window
fram e
Room Air Heat Pump with R-410A
min.
30" to 38.1"
(With accordion panels)
26" min.
(Without accordion panels)
26" min.
(Without accordion panels)
W ood
Stool
3 REMOVE THE AIR CONDITIONER
FROM THE CASE
Remove the locking screw and locking
A
Remove the locking screw and lock-
bracket from the lower frame. Save to
ing bracket from the lower frame.
reinstall later.
Save to reinstall later.
Remove the ground screw and save to
B
Remove the ground screw. Save to
reinstall later.
reinstall later.
Remove the ground screw
and save to reinstall later
Slide the air conditioner from the case by
C
gripping the base pan handle and pulling
forward while bracing the case.
4 PREPARE THE WINDOW
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
8
8
Heat Controller, Inc.
unit