Assembly - Fisher-Price OCEAN WONDERSTM AQUARIUM CRADLE SWING 79667 Instructions Manual

Assembly

IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.
Never substitute parts.
Lower Leg
1
• Position a lower leg so that it stands on a flat surface, as shown.
• Fit a foot onto the end of the lower leg.
• Insert a #8 x 1 / " screw through the bottom of the foot
2
and into the lower leg. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• Repeat this procedure to assemble the other foot to the
other lower leg.
Straight
End
Button
Hole
2
• Position an upper leg so that the red dot is up.
• While pressing the button on the straight end of an upper
leg, insert the upper leg into a lower leg. Make sure the but-
ton on the upper leg "snaps" into the hole in the lower leg.
• Repeat this procedure to assemble the other upper leg to the
other lower leg.
#8 x 1 / " Screw - 2
2
SHOWN ACTUAL SIZE
Foot
Red Dot Up
Upper Leg
Lower Leg
Button
Hole Up
3
• Position the storage pouch with the pockets toward you,
and the button holes are up.
• Position the legs so that the feet are away from you.
• Slide the storage pouch onto the upper legs.
Button
Hole
4
• Fit the rivets on the upper legs through the button holes in
top ends of the storage pouch.
4
Button
Hole Up
Storage
Pouch
Pockets
Upper
Legs
Rivet
Through
Button
Hole