BREAKING IN THE PUMP
See figure 3 - 4.
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to
open the air flow. Turn the locking nut clockwise to lock.
Place the switch in the OFF (O) position and plug in the
power cord.
Open the drain valve completely.
Turn the air compress ON ( l ) and run the air
compressor for 10 minutes to break in pump parts.
Place the switch in the OFF (O) position.
Close the drain valve.
ASSEMBLY
ON/OFF
SWITCH
PRESSURE
12
PRESSURE
SAFETY
REGULATOR
VALVE
TANK
REGULATOR
PRESSURE
GAUGE
GAUGE
DRAIN VALVE
KNOB
LOCKING
NUT
QUICK
COUPLER
Fig. 3
Fig. 4