Advertisement
1
1
Opening
Leg
One-time Assembly
• Position one of the joints front side up.
• Position a threaded knob with the peg side down.
• Insert and snap the threaded knob into the upper
hole in the joint.
• Insert a right and left leg (marked R or L on each
leg) into the slots on the joint. Make sure the
buttons on the legs fit into the circular openings
in the joints.
• Repeat this procedure to attach the other threaded
knob and two legs to the remaining joint.
Baby Gym
Hole
Button
5
Threaded Knob
Joint
Advertisement
