Table of Contents
Advertisement
Item
Product Capability
Pump Stage
Maximum Pressure
Maximum Intake Capacity
Pump RPM
Cylinder Design
Stroke
Oil Capacity
Shaft Diameter
Mounting Holes
Lubrication System Design Splash
Construction
Pulley Design / Size
Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and
assembly diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep this manual and invoice in a safe
and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
SKU 09592
PRODUCT SPECIFICATIONS
For use with 3 HP, 3400 RPM (not included)
Single
140 PSI
8.05 CFM
1,200 RPM
Twin
1.57"
28.73 ounces
15/16"
Qty. 4 / 3/8" Diameter /
Bolt Pattern: 5-1/2" L x 7-1/2" W
Aluminum Head, Pump, Flywheel / Cast Iron Sleeve
Belt Driven
10-5/8" Dia. X 1/2" Belt, CCW Rotation
23.25 Pounds
SAVE THIS MANUAL
PAGE 2
Description
REV 04/04
Advertisement
Table of Contents
