Switching Source Signals; Adjusting The Volume - HANNspree ST31-15A1 User Manual

Switching Source Signals

Press the
SOURCE
different source signals.
CH, AV1, and AV2 appear on the top
right corner of the screen in that order.
Note
The TV supports S-Video input in addition
to normal video and audio signals. The TV
detects the signal type automatically and
gives priority to S-video when two signals
are detected at the same time.

Adjusting the Volume

1
Press the VOL UP button to increase
the volume.
2
Press the VOL DOWN button to
decrease the volume.
3
Press the MUTE button. The word
"MUTE" appears on the top right
corner of the screen and sound is
turned off.
4
Press the MUTE button again to
restore the original volume.
30
button to select
SOURCE MENU
Source
SOURCE MENU
Volume down
Volume up
Mute
CH 33
MUTE
CH 33
MUTE