Channel Add/Erase - HANNspree ST31-15A1 User Manual

Channel Add/Erase

TV MENU
TV/CATV
CH ADD/ERASE
AUTO PROGRAM
SEL SEL ENTER ENTER
TV
CH UP/DOWN
-ERASE ADD+
MENU MENU
48
1
CATV
2
MENU MENU
Press the CH UP / DOWN button to
select a channel on the front panel.
43
Add Channel
Then press the VOL UP button on the
front panel to add the selected channel.
The channel number changes from
yellow into green after adding the
channel.
Erase Channel
Then press the VOL DOWN button on
the front panel to erase the selected
channel. The channel number changes
from green into yellow after erasing the
channel.
Note
You can still access the erased channel
by entering the channel number using
the number buttons on the remote
control. Add the channel again if it was
erased accidentally.
Press the CH DOWN button to
select CH ADD/ERASE.
Press the VOL UP button. The OSD
menu display switches to the
following screen.