Table of Contents
Advertisement
2.3
Using the TV
2.3.1
Turning the TV On and Off
1 Press
on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2 Press
again. The power LED changes from green to red, indicating that
the TV is in standby mode.
2.3.2
Switching Source Signals
Press
on the control panel or
incoming source signal to set TV source for channel search. Performing an
Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press
on the control panel or remote control, then select to enter the
Channel menu.
2 Select Auto Search.
3 Press
on the remote control to run the channel search.
2.3.3
Selecting Channels
•
Press
on the remote control or control panel to increase the channel
number.
•
Press
on the remote control or control panel to decrease the channel
number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
22
on the remote control to select the
Hide quick links:
Advertisement
Table of Contents
