Table of Contents
Advertisement
B
Follow your progress with the display.
HOW TO CREATE A CUSTOM PROGRAM
During the program, the display will show the pro-
gram profile, the time remaining in the program,
LIT
and the distance you have pedaled.
U
To view the profile, your pedaling pace, and the
distance you have pedaled, press the Display but-
ton. Note: The words SPEED UP or SLOW
DOWN may appear in the display to prompt you
to keep your pedaling pace near the target pace
setting for the current segment.
To view the time remaining in the program and the
distance pedaled, press the Display button. Press
the Display button again to view the time remain-
ing and the approximate number of calories
burned.
To view the time remaining, distance pedaled,
ramp incline, number of grams of carbs burned,
and pedaling pace, press the Display button
again. Note: An upward- or downward-pointing
arrow may appear in the display to prompt you to
keep your pedaling pace near the target pace set-
ting for the current segment.
To view the first display again, press the Display
button again.
_
easure your heart rate if desired.
See step 5 on page 15.
r_Turn
on the fan if desired.
See step 6 on page 15.
B
hen you are finished
exercising, the console
will turn off automatically.
See step 7 on page 15.
la
Turn on the console.
See step 1 on page 14.
Select a custom program.
To select a custom program, press the Custom
Programs button once or twice. When you select
a custom program, the name of the program and
the settings for the program will appear in the dis-
play for a few seconds.
IL."lJ!iiiiiiJ
T_ME
REVOLUTmONS
_
egin pedaling to start the program, and
program the desired settings.
Each custom program is divided into 30 one-
minute segments. You can program one resis-
tance level and one target pace setting for each
segment.
To program a resistance level for the first seg-
ment, simply adjust the resistance of the pedals
by pressing the OneTouch Resistance buttons. To
program a target pace for the first segment, sim-
ply pedal at the desired pace.
At the end of the first segment, the program will
store the current resistance level and your current
pace in memory. Program a resistance level and
a target pace for the second segment as
described above.
Continue exercising for up to forty minutes. Stop
pedaling when you are finished with your work-
out. The program you created will then be stored
in memory. Note: If your workout is less than thirty
minutes long, any remaining segments in the pro-
gram will be stored with the last resistance level
and target pace setting you programmed.
B
hen the program is finished,
the console
will turn off automatically.
See step 7 on page 15.
17
Hide quick links:
Advertisement
Table of Contents
