Table of Contents
Advertisement
Controls a nd Features
4
Recoil Starter
Cutting
Height
Adjustment
Lever (one at
each wheel)
Grass Catcher
J
Figure 4-1
BladeControl
Recoil S tarter
The blade control
is attached
to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the
unit. Release it to stop engine and blade.
_
ARNING:
This blade control
is a safety device.
Never attempt
to bypass its operations.
Cutting Height AdjustmentLever
One adjustment
lever is located
on each wheel and is used to
adjust the cutting
height. All four levers have to be at the same
relative
position
to ensure a uniform
cut. To adjust the cutting
height,
refer to the "Assembly
& Set-Up" Section.
The recoil starter is attached
to the right upper handle. Stand
behind
the unit and pull the recoil starter rope to start the unit.
Grass Catcher
The grass catcher, located
at the rear of the mower, is used to bag
the grass clippings
for disposal at another
site. Once the bag is
full, it has to be removed
from the mower and emptied
before
any further
mowing.
Advertisement
Table of Contents
