SECTION
6: CONTROLS
Release
Knob
Choke Lever
Throttle
Control
Starter Handle
Model 465A Shown
Figure 2
Release
Knob:
Used to release the hopper when raising or lowering.
Choke Lever:
Used to enrich the fuel mixture in the carburetor when starting a cold engine.
Starter
Handle:
Used to manually start the engine•
Hopper Assembly:
Atlows
leaves and smart branches
up to 1" diameter
to be fed
chipping and shredding• Lower the hopper to collect raked material for shredding.
Throttle
Control
(if equipped):
Regulates speed of the engine.
Chipper Chute:
Allows bulky vegetation
like stalks or heavy branches to be fed into the
and shredding.
Maximum diameter is 3" on model 465A and 2" on model 462B.
Catcher Bag (Not Shown):
Usedto
collect the shredded material,
into the impeller for
impeller
for chipping
8