Advertisement
l
l_lP
with
VCR and a
hookup
a
J[
Digital Video Disc Player (or
similar devie_
€_
First connect the original cable
TV signal or Antenna signal to the
ANT IN jack on the back of the
VCR,
<_
Connect the ANT OUT jack on
the rear of the VCR to the ANT IN
jack on the rear of the Video Disc
Player.
<_
Connect the ANT OUT jack on
the rear of _e Video Disc Player to
q_.ANT ' A' input on the rear of the
<_
Connect the yellow Video Cable
from the VIDEO OUT jack on the
VCR to the VIDEO IN jack on the
TV (labeled AV 1). Then, connect the
red and white Audio Cables from the
AUDIO OUT jacks on the VCR to the
AUDIO IN jacks on the rear of the
'IV (labeled AUDIO L & R AV 1).
_
Connect the yellow Video Cable
from the VIDEO OUT jack on the
Video Disc Player to the VIDEO IN
jack on the TV (labeled VIDEO AV
2). Then, connect the red and white
Audio Cables from the AUDIO OUq
jacks on the VCR to the AUDIO IN
jacks on the rear of the TV (labeled
AUDIO L & R AV 2).
Note: When selecting the PIP
SOURCE, the VCR will appear on
the AV 1 channel, and the Video
Disc Player will appear on the AV 2
channel.
O
75 OHM COAXIAL CABLE
©
VIDEO
CABLE
(YELLOW)
OUTSIDE
UHF/VHF
ANTENNA OR
CABLE
TV
SIGHAL
50
Advertisement
