Advertisement
The TV's AudiolVideo
Input jacks
are for direct picture
and sound
connections between the TV and
a VCR (or similar device) that
has AudiolVideo
Output jacks.
<_
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con-
nect the AUDIO (red and. white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV (AV 1 or AV 2).
_
Connect the VIDEO (yellow)
CABLE to the VIDEO OWl'jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
_Turn
the VCR and the TV
ION.
<_
Use the A/V button on the
remote to select the AV I chan-
nel.
With the VCR ON and a prere-
corded tape inserted, press the
PLAY button to view the tape
on the television.
O
hutlOn on the remote will toggle the
picture sourcefrom the current chan-
nel, to the last channel viewed, then
to Ihe AV I cunnection, Iben to the
AV 2 connection.
"/'his also applies to the Multi Media
bultort on Ihe remote. Repeatedly
pressing the Multi Media bulton will
toggle the picture source from the
¢tarrent channel to the last viewed
channel, then to the MM I tAV I)
connectio*a, then to the MM 2 (AV 2)
eonnecilotl.
24
AV I
®®®
When uskag the Audi_Video
AV I itv0uljacks, the vtdea and tout_:l cu_ be[
vlewed and heard on the AV I channel.
When using the Audlo/Video AV 2 input jacks, the video and sound can be
viewed and heard on the AV 2 channel,
BACK OF 'IV
f
Y
©
0
VIDEO IN
{YELLOWI
BACKOFVCR
(_QUIPPF_U WITH VIDEO AND
AUDIO OUTPUT JACKS)
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO R
JACK,
32
Advertisement
