Advertisement
J
f
J
J
For most homes this step would
not be needed but for your infor-
mation:
Up to 9 different remote Iocator
address codes can be set on
which the TV can send out its
"homing" signal.
This is done in case there is more
than one TV (with remote loea-
tor) present, and you want only
one spec_c remote to be sig-
naled when the TV is turned
ON.*
To set a Locator Address Code:
<_
With the TV turned ON, press
the LOCATOR CODE button
on the remote. (Also be sure the
TV/VCR/ACC SYSTEM switch
is in the TV mode.)
<_The
TV shows the present
Remote Locator Code.
_
Press any
button
number
(0-9) on the remote to set or
change the Locatot Code.
SEE THE INFORMATION
10 THE RIGHT
ON HOW
"PO USE THE LOCATOR
CODE
BUTTON
FOR PROGRAMMING.
* For owners who live in apartment (town-
houseor condominium) complex, this task
may be nec_ssars" s ince the remole Iocalor's
slgnal can be sera _d delccted dJreclIy
through adjoining walls.
Remember, if the batteries
are replaced the Locator
Code will need to be reentered.
When setting the Locator Code if
any button, other than the number
buttons are pressed, the remote
will return to its normal operation
mode.
35
Advertisement
