Advertisement
OTE: If you went through
etup (in your Quick
Use
Guide),
this task has already
been
completed
for you.
You need to make sure that the TV
is set to pick up either Cable TV
stations
or Antenna
signals.
In
other words, the TV needs to
know whether you have connected
a Cable TV signal
or a normal
antenna
to its ANTENNA
plug.
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word CABLE with the TV's
on-screen arrow.
<_
Press the
button
the
(+)
(on
TV or the remote) to select either:
YES- If you DO have Cable TV
connected to the TV.
Channels 1-125 can be
selected.
NO-
If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
<_
Press STATUS to clear the
screen.
Try it out. Press
CHANNEL ••
buttons
4
and scan the channels.
Remember, the TV has been set at
the factory to select certain chan-
nel numbers.
See the following
page on how to set the TV to
select the channels in your area.
Advertisement
