Advertisement
m_
OvcU an view the playback of
R tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play-
back of a VCR tape:
'_
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
(2,_,_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word INPUT with the TV's
on-screen arrow.
Note: You can press the CHAN-
NEL • W buttons to select
"VCR/AUX" (if it has been
added to the TV's channel mem-
ory.) See page 7 for details.
,_--_
Press the (+) button to select
y
I be VCR/AUX(iliary) INPUTS
on the rear of the TV.
_Turn
the VCR ON and
I
LAY the VCR tape to be
viewed on the TV.
Remember, when you're
g thr_)ugh using the A/V
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con-
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin-
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con-
nect to the audio inputs on the TV.
-[
PICTURE AND SOUND FROM PLAY-
BACK OF VCR TAPE
VIDEO IN
(YELLOW)
RCA PHONO PLUG
CABLES (NOT SUP-
PLIED)
AUDIO IN
(RED/WHITE)
OF VCR
VCR
(EQUIPPED
WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE "TV/VCR" BUTrON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELL AS SELECT CHANNELS
3 OR 4.)
20
Advertisement
