Hooking Up Your Vcr - Magnavox VRT245A Owner's Manual

6
Hooking Up Your VCR
• •"""" • • "'*" """ • • "•-• ••,-•Q•, • •• •,•, ,.• •• •o •,• •• •• •o•,, •, •• •., o. o• •• •., .• •. •,,.. o.,,, .• •,, • •. • • °.,,, •,,,,., • • ••, • •.• •, •.•o °.•,, •.•°
The basic VCR/TV connection - antenna/cable to VCR to TV - is shown below. For other hookups, including those that use
cable converter/descrambler boxes, see pages 35 - 38,
1
Disconnect the antenna or
cable from your TV.
_A _ Indoor Antenna
(VHF/UHF)
HtF)na _--____._
Back of TV
(example only)
Antenna Jack
2
Connect the antenna/cable
to your VCR.
\\\ _ # IIII
7
IN FROM ANT Jack
Back of VCR
OUT TO TV
Jack
Connect your VCR to your
TV with the black RF
coaxial cable.
Select channel 3 or 4.
Set the CH.3/CH.4 switch on the back of the
VCR to CH.3 or CH.4, whichever channel is
not used or least used in your area. To oper-
ate your VCR with your TV, set the TV to the
same channel. For example, when playing a
tape, if the CH.3/CH.4 switch is set to CH.3,
the TV should be on channel 3.
I Back of VCR
Wall Outlet
IN FROM Back of rl'V
ANT(enna) Jack (example only)
OUT TO TV Jack
Coaxial Cable | _
(supplied) ! 2mHbin/_aHF n
Antenna Jack
Back of V C."__-_i_ \
_.-th-'--I1P--'T'_uuuUuuuu |'_ ®-® _1U--q
w.,, / \
Outlet • _ / .... "
TV [" CHANNEL
4s 'tch
/
Wall Outlet [ Ill/L--I]