Table of Contents
Advertisement
23
Setting Up VCR Plus+ (cont'd)
Remote Control
o_/_
#pi
IpA,
v
"u-'-U-U
®
®
®
®
®
®
o
MENU
button
Number
buttons
°°.
°.
oo ,,,t,
°°o,,e**,,o,tol,e,,*oe,,,eeeee=te
• "lb correct
a guide channel
number:
1. Repeat
steps 3 - 4 on this page.
2. At step 5, enter the incorrect
guide
channel
number for both the guide
channel
and the user channel.
This
will make the guide channel
and user
channel
the same.
3. Repeat
steps 3 - 6 again,
this time
entering
the correct guide channel
and user channel.
• To correct a user channel
number:
l. Repeat steps 3 - 4 on this" page.
2. At step
5, enter the correct guide
channel
and user channel
numbers.
To cancel a pair of numbers:
1. Follow ,step 9 to display
the guide
channel
map.
2. Press the CLEAR
button.
A pair of
numbers
will flash.
3. Pres's the CHANNEl,
(Up/Down)
but-
tons until the pair of numbers
you
wish to cancel
is flashing.
4. Press the CLEAR
button again.
The
pair of numbers
that was flashing
will
disappear.
5. Press the MENU button to exit.
Now, compare the channel numbers
• you have written into the GUIDE CH.
and USER CH. columns. You'll notice
that some stations have guide and user
channel numbers that are the same, and
other stations have channel numbers
that do not match. Where the channel
numbers do not match, you must tell
the VCR the guide and user channel
numbers according to the steps below.
3
Press the MENU button, then press the
Number 2 button to select VCR SET UR
TO SELECT
PUSH
NO. SHOWiNg)
NORMAL
PLAY
(
3 ON SCREEN
MODE
4 LANGUAGE
5 GUIDE
CHANNEL
SET
6 GUIDE
CHANNEL
MAP
O END PUSH MENU
4
Press the Number 5 button to select
GUIDE CHANNEL
SET.
SELECT
GUIDE
CH. NO,
GUIDE
CH.L_
USER CH. JS"
END PUSH MENU
5
Look at the boxes you filled in on
pages 22. For stations whose guide
channels
and user channels
are not the
same, press two Number
buttons for
the guide channel and two Number
buttons for the user channel.
6
Always
enter
"0"
before
an3J single
digit channels.
• If you select line input for the user
channel, press 0, 0. AUX will appear
on-screen.
SELECT
USER
CH
NO
GU DE OH. 28
USE. ORb, _
TO
CORRECT
PUSH
CLEAR
_
CEND
PUSH
MENU
Press the Number 1 button so your
VCR will memorize the guide channel
and user channel numbers you have
selected. Or, press the Number 2 but-
ton to quit and select another pair of
numbers.
GUIDE
CHANNEL
SET
1
I
TO SELECT
PUSH.
NUMBER
GUIDE
CH, 28
USER CH
04
1 MEMORIZE
2 SELECT
ANOTHER
CH
TO CORRECT
PUSH
CLEAR
_O
END PUSH MENU
Repeat steps 5 and 6 for all the stations
on your list which have different guide
channel
and user channel numbers.
Press the MENU button to exit.
9
To confinn
the guide channel and user
channel numbers
you have selected,
press the MENU button to bring up the
main menu display.
Then press the
Number
2 button to select VCR SET
UR Finally, press the Number
6 button
to select GUIDE CHANNEL
MAR
A
list of guide channel
and user channel
numbers
memorized
by the VCR will
appear
on-screen.
If there are more
than ten pairs of numbers,
press the
Number
1 button
to view another
screen
of numbers.
Make sure these
numbers
correspond
to the boxes you
filled in in step 1. Then press the
MENU
button
to exit.
GUIDE
: USER GUIDE:
USER
1
: AUX
2:
2
3:3
4:
4
23:
5
6:
6
7
: 7
91:
8
9
: 9
10:10
7[0
CANCEL
PUSH
CLEAR
NE_CT=I
END=MEN
Advertisement
Table of Contents
