Table of Contents
Advertisement
"EJECT"
Button
"PLAY"
Button
Operates with "POWER"
either on or off, if a_
Used for playback of tape recorded in the SP
power source is connected to the Camera/_
mode.
Recorder.
_,
NOTE: When
the
Camera/Recorder
is in
_,
record/pause
(stand-by) mode, pressing and
"_
holding this Button will play the tape at normal.
"POWER"
Light
and
Dew
Indicator
_%
_,
Light
_%_
Flashing of the Light indicates dew conden-
_'_
_,
•
,
"%
satlon
on
Camera/Recorder
mechamsm.
"_,
"_
"_
While this Light is flash ng, the un t will not.,
_
_.
operate.
Leave the power on until the Light
_
_%
stops flashing. Then the unit can be operated.
_
'_%.,_
"_,_
"POWER"
ON/OFF
Button
Press "POWER"
ON/OFF
Button to turn
Camera/Recorder
on.
Press again to turn _
Camera/Recorder off.
"POWER"
Light illuminates when "POWER"
ON/OFF
Button is pressed
and Camera/
Recorder is on.
"VCR/CAM"era
Select
Switch
This Switch changes the Camera/Recorder
tc
the record mode or to the playback mode. The
Switch must be in "CAM"era
position for
recording.
"REWIND"
Button
Press this Button during Stop or Fast forward
mode, and fast-rewinding starts. "'REWIND"
appears in the viewfinder whenever the linear
time counter or time remaining is present,
Press the Button during playback of tape, and
the tape is played back in the rewind direction
approximately 3 times faster than the normal
speed to confirm the recorded contents.
Press "PLAY"
Button to return to normal play-
back mode or press "STOP"
Button to stop
tape movement.
NOTE: You can also visually scan backward
when the Camera/Recorder
is in record/pause
(stand-by) mode by pressing and holding this
Button.
15
Hide quick links:
Advertisement
Table of Contents
