Sears 934.53735190 series Owner's Manual page 13

9. After recording, set "VCR/CAM'" Select Switch
to "'VCR", and the Camera/Recorder will be now
in the stop mode.
"VCR/CAM'" Select Switch
13. Press "POWER" ON/OFF Button off and then
"EJECT" Button to remove cassette.
"POWER" ON/OFF Button
"EJECT" Button
10. Press "REW" Button. The tape will be rewound to
the beginning.
11. Press "PLAY" Button. The picture you just
recorded will be seen through the View'finder and
sound can be heard by earphone (Not supplied).
NOTE: If you connect the Video Camera/Recorder
to your TV, you can see the picture played back on
your TV. Refer to VIEWING THE PICTURE
PLAYED BACK ON YOUR TV" on pages 32 and
33.
12. After playing, press "STOP" Button.
14. Always remove the power source from the Video
Camera/Recorder after use.
"'REW'" Button
"PLAY" Button
"STOP" Button
To prevent an accidental erasure of recorded
material:
If you have a cassette tape that has already been
partially recorded on and you want to record on the
remaining blank section, see "EDIT SEARCH" on
page 37.
12