Troubleshooting Tips - GE Profile Owner's Manual And Installation Instructions

Before you carl for service...
Troubleshooting Tips
Save time and money./Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What to Do
Water filter indicator must be reset
This is normal. This indicator will turn
on to tell you that you need to replace
the filter soon.
Handle needs adjusting
This is door alarm
Non-L CD models:
-Press and hold reset button.
LCD models:
-On the LCD screen select
SETTINGS, then WATER FILTER. Select
RESET.
See About the Water F/lterfor more
information.
See Attach Fresh Food Handle and
Attach the Freezer Handle sections for
detailed instructions.
-Turn off or disable with door closed
-If door open and alarm is sounding, you
can only snooze the alarm
The cooling system is off See About Controls,
Water dispenser has not been used Dispense water, until all water in system
for a long time is replenished.
Normal when refrigerator is first Wait 24 hours for the refrigerator to
installed completely cool down.
Water dispenser has not been used Dispense water, until all water in system
for a long time is replenished
Water system has drained Allow several hours for replenished
supply to chill
Water supply line turned off or not See/nsta///77g the Water Line
connected
Water filter clogged or filter/bypass Replace filter cartridge or remove filter
plug not installed and install bypass plug
Air may be trapped in the water Press the dispenser arm for at least 5
system minutes.
Water in reservoir is frozen because Set the refrigerator control to a warmer
the controls are set too cold setting and wait 24 hours. If the water
does not dispense after 24 hours, call for
service
Newly installed filter cartridge Run water from the dispenser for 5
minutes (about 2 gallons)
*Select Models Only
38