Table of Contents
Advertisement
Specifications
Power
Electrical Input
Motor Speed
Accepts Collet Sizes
Maximum
Cutting Depth
Depth Measurements 1/64" increments
Accessories
Save this manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product's serial number in the back of the manual near
the assembly diagram (or month and year of purchase
if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
important Safety information
In this manual, on the labeling, and all other
information provided with this product:
this is the safety alert symbol. it is
used to alert you to potential personal
injury hazards. Obey all safety
messages that follow this symbol to
avoid possible injury or death.
DanGeR indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WaRninG indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CautiOn, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
Page 2
2 HP
120 V~ / 60 Hz / 11 A (Rated)
28,000 RPM (No Load)
1/4", 3/8", 1/2"
2-3/8"
1/4", 3/8" Collet Chucks
Carbon Brushes
Straight Trimmer Guide
Two Wrenches
e194601
For technical questions, please call 1-800-444-3353.
nOtiCe is used to address practices
not related to personal injury.
CautiOn, without the safety alert symbol, is used
to address practices not related to personal injury.
General Power tool
Safety Warnings
WaRninG Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2. electrical safety
a. Power tool plugs must match the outlet.
never modify the plug in any way. Do
not use any adapter plugs with grounded
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b. avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d. Do not abuse the cord. never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f. if operating a power tool in a damp location
is unavoidable, use a Ground Fault Circuit
interrupter (GFCi) protected supply.
Use of a GFCI reduces the risk of electric shock.
SKU 68341
Hide quick links:
Advertisement
Table of Contents
