GE SpacemakerXL JVM1542 Owner's Manual page 32

Replacing the lightbulbs.
Remove
screws
Cooktop Light/Night Light
Replace the burned-out bulb with a 40-watt
incandescent bulb (WB36X10003), available
from your GE supplier.
I To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw from the side of the light
compartment cover and lower the cover until
it stops.
I Be sure the bulb(s) to be replaced are cool
before removing. Break the adhesive seal and
remove the bulb by gently turning.
I Screw in the new bulb, then raise the light
cover and replace the screw. Connect electrical
power to the oven.
Screws
Oven Light
Replace the burned-out bulb with a 40-watt
incandescent bulb (WB36X10003), available
from your GE supplier.
inTo replace the oven light, first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
_ Remove the top grille by taking out the 2 screws
that hold it in place and sliding the grille to the
left (opening the door makes grille removal
easier).
Remove the light cover near the center of the
oven that holds the bulb.
Replace the bulb and light cover, then replace
the grille and screws. Connect electrical power
to the oven.
32