Turning On And Off; Setting Language And Date/Time; Set Display Language - GE G100 User Manual

Pressthe Power button to turn the camera on. To turn offthe
camera, press the Powerbutton again
Power Button
The Date/Timeand Languagesetup will
page
automatically appear when the camera is turned onfor
the first time.
Toset the display language and date/time, go to the following
setup options in the General S etup menu.
o Language
o Date/Time
Toaccessthe GeneralSetup menu,do the following:
1. Pressthe Powerbutton to turn the camera on.
2. Pressthe @ button, press Up/Downbutton to switch
between menus,select General Setup Menu,press Q
button to enter Set Menu.
After the camera is powered on, set the camera to Auto mode
by turning the Mode Dial at the top of the camera (seepage
23).
Set Display Language
1. In the GeneralSetup Menu,press Up/Down button to
select Language, press Q or Rightbutton to enter setting
mode.
2. Usethe Up/Down/Left/Right buttons to select the desired
language.
3. Pressthe _ button to confirm the setting.