Specifications; Safety Warnings And Precautions - Central Pneumatic 93974 Assembly And Operating Instructions Manual

Operating PSI
Air Consumption
Spray Guns
Air Inlet (Both Guns) 1/4" NPS
Materials
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use these tools in damp or wet locations.
Don't expose to rain. Keep work area well lighted. Do not use electrically powered
compressors in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, paint, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6. Dress properly. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved dust mask or respirator when working around
chemical dusts, paints and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.
SKU 93974
For technical questions, please call 1-800-444-3353

Specifications

50-70 PSI (Large Gun); 30-50 PSI (Small Gun)
16 SCFM (Large Gun); 8 SCFM (Small Gun)
1 Large Spray Gun with 32 oz. paint cup; 1.8mm nozzle
1 Small Spray Gun with 7 oz. paint cup; 1.5mm nozzle
Cast Aluminum Gun Bodies; Brass Nozzle & Fittings; Sheet Metal Trigger
Cast Zinc Trigger
(Small Gun)
Save This Manual

Safety Warnings and Precautions

; Spun Aluminum Paint Cups; Polyurethane Air Hose
;
(Large Gun)
Page 2