Selecting Channels; Switching Source Signals - HANNspree F629-10A1 User Manual

Selecting Channels

Press the CH UP button and the
Channel down
Channel up
CH DOWN button on the control
power menu vol ch source
panel to select the channel or
enter the specific channel num-
ber by pressing the number but-
tons on the remote control.

Switching Source Signals

Press SOURCE to select the
Current source setting
incoming source signal.
power menu vol ch source
The current source setting
(TV/CATV, S-Video, or AV)
appears on the top left corner of
the screen.
S-VIDEO
Note
The TV supports S-Video input in
addition to normal video and audio
signals.
28