Light Bulb Replacement - GE Appliances JVM1730 Owner's Manual

Light Bulb Replacement
b./bwithaI2ovolt,
40-watt i noandescent :_
bMb (WB36XiO003),
a_ai/ab/e #O,, v O.r
cE s.o, ie .
I To replace the bulb(s),
first disconnect the power
at the main fl_se or circuit
breaker panel or pull
the plug.
2 Remove the screw at the
flont of the light cover
and lower the cover.
!/!
Remove screw
3 Be sure the bulb(s) to be
replaced are cool betore
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4 Raise the light shield
and replace the screw.
Connect electrical power
to the oven.
40-wa# incandescent
bulb (WB36XIO003),
I To replace the oven light,
first disconnect the power
at the main fl_se or circuit
1)reaker panel or pull
the plug.
2 Remove the top grille by
raking out the 2 screws
that hold it in place.
Remove the charcoal
filter (if present) to
access the light cover
(see Remove Charcoal
Filter section).
4 Remove the light cover
located near the center
of the oven that holds
the l)ulb. After l)reaking
the adhesive seal,
remove the 1)ull) by
gently turning. Replace
with the same size and
type bulb.
Light cover
5 Replace the light cover
and charcoal filter
(if present).
6 Replace the grille and
screws. Connect electrical
power to the oven.
33