Panasonic TH-65VX300ER Operating Instructions Manual page 63

Using FUNCTION button
Waveform Monitor
The waveform monitor displays (see page 48).
To exit this mode, press the FUNCTION button.
Marker settings
The marker displays (see page 49).
Each time the FUNCTION button is pressed, the screen is switched in the following order; Preset 1 Preset 2 Off.
HV Delay
The video blanking period displays (see page 27).
Each time the FUNCTION button is pressed, the screen is switched in the following order; H Delay V Delay
HV Delay Off.
Blue only
The screen displays only blue colour for image adjustment.
To exit this mode, press FUNCTION button.
MONO
The screen is displayed in black and white by the Y signal alone (see page 51).
To cancel, press the FUNCTION button.
R On/Off / G On/Off / B On/Off
R / G / B signals are turned off (see page 51).
Each time the FUNCTION button is pressed, each signal switches between On/Off.
Volume + / Volume –
The volume is adjusted.
Press the FUNCTION button to turn the volume UP/DOWN.
Mute
The sound is temporarily muted.
Press the FUNCTION button again to cancel.
63