Panasonic SC-AKX54 Operating Instructions Manual page 4

Making the connections
Conserving power
The system consumes approximately 0.3 W when it is in
standby mode. Disconnect the power supply if you do not
use the system.
Some settings will be lost after you disconnect the system.
You have to set them again.
1
4
To household mains socket
1
Connect the speakers.
2
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2
3
White
3
Connect the FM indoor antenna.
Place the antenna where reception is best.
4
Connect the AC mains lead.
Use the supplied AC mains lead with this system only.
Do not use an AC mains lead from other equipment.
Tape
4