Section 4: Wiring; Honeywell Gas Control And Pilot - Montigo L42DF ST Indoor Installation & Maintenance Manual

Section 4: Wiring

Models Included
L42FSDNI
L42FSDLI
Wiring Schematic for Honeywell gas control & Pilot
Honeywell (Q3450)
Pilot Assembly
Gas Control
Connector
Fan Plug
Receptacle
Gnd Screw
Wall Switch
Figure 21a. Wiring for the L42DF-ST-E with Honeywell gas control and pilot.
XG0182 -112811
Installation
1.
2.
Figure 21. Wiring for the SIT IPI Wiring Schematic
Pilot Electrical
Harness Connector
Models Included
Honeywell Gas
Control (SV9501M)
L42FSDNE
L42FSDLE
Junction Box
115VAC
24VAC
40 VA
Transformer
Wiring for the optional Fan Kit
All L42DF-ST* fireplaces may be equipped with optional fan kits for
circulating heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70.
For more information see the Fan Kit Installation guide included with
the fan kit.
NOTE: If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
Black
White
5/1/60 Supply
Green
G L1 L2
Figure 21b. Wiring schematic for optional fans.
L42DF-ST* Indoor Gas Fireplace
L2-WH
G
L1-BLK
Quick Connect
p g lu to motor
Page 15