Outboard Turning - Grizzly G0698 Owner's Manual

NOTICE
Only use screws with non-tapered heads
(Figure 44) to attach the faceplate to the
workpiece. Do NOT use screws with tapered
heads because they can split the faceplate,
or may snap off during operation.
Figure 44.
3.
Faceplate Page 24
Mounting the Workpiece onto a
Backing Block
1.
2.
3.
4.
Note: Allow the glue to cure according to the
manufacturer's instructions.
5.
Workpiece onto the Faceplate
Headstock
To outboard turn on the Model G0698:
1.
2.
Mounting the

Outboard Turning