Seats
ELECTRONICALLY OPERATED DRIVER SEAT CONTROLS
Slide/Tilt Switch
Seat can be moved back and forth,
raised, lowered, or tilted with this control.
MEMORY SEAT
PROGRAMMING
SWITCHES
To Program the Driver's Seat Position:
1
Park vehicle.
2
Adjust seat to desired position using the Slide/Tilt and Recline switches.
3
While holding the SET button in, press one of the three (3) programming
buttons until a beep sound is heard. Programming is now complete.
Program remaining buttons as necessary.
•
You can also program one seat position for each advanced
key/retractable type key used with the vehicle. See Owner's
Manual for programming instructions.
To Move the Seat to a Programmed Position:
•
Press and release one of the programmed buttons (1, 2, or 3) when
entering the vehicle (driver's door open and ignition OFF).
•
Press and hold one of the programmed buttons (1, 2, or 3) in all
other situations (driver's door closed or ignition ON).
3
NOTE:
Memory seat functions do not operate while the vehicle is in motion.
Recline Switch
Seatback angle can be changed
with this control.