Mazda 3 Smart Start Manual page 19

Multi-Information Display
Maintenance Monitor
The Maintenance Monitor will remind you of your next service and/or tire
rotation by simply entering a mileage and number of days interval. After
setting an interval for each, the system will display a message in the MID
for 5 seconds each time the vehicle is started when service due or tire
rotation is near (unless ENTER is pressed, which clears the message
completely). Once maintenance is done, the Maintenance Monitor needs
to be reset to notify you for the next service. To set, reset, or turn off the
Maintenance Monitor:
Push
ENTER
Push
ENTER
Select a digit using the RIGHT
or LEFT button (arrows above
the digit to be changed), and
then flip the ENTER (UP/DOWN)
switch up or down to change
the value of the digit. If there is
no need to change the digit,
leave it as is. When finished,
push in on the ENTER
(UP/DOWN) switch, then
push the iNFO button.
NOTE:
•
For the service due notification, the number of days and distance can be
set. For tire rotation notification, only the distance can be set.
• For service due, the message appears for whichever one occurs first,
mileage or number of days.
Push DOWN,
then ENTER
Push
ENTER
Select OFF to turn
Maintenance
Monitor off.
18