Front Panel - Marantz SR4300 User Manual

FRONT PANEL

q w
SURROUND
STANDBY
POWER ON/OFF
q POWER switch and STANDBY indicator
Press the button to turn the power ON, and press again to turn it OFF.
If the POWER switch is in the ON position, the power of this unit can
be turned ON/OFF by pressing the POWER button on the remote
control unit.
When this unit is in the standby mode with the POWER switch set to
the ON position, pressing one of the FUNCTION SELECTOR buttons
also allows to turn the power on.
The STANDBY indicator lights up when this unit is the standby mode
(power OFF) by the remote control unit.
w SURROUND MODE Selector knob
When this knob is turned, the surround mode is switched sequentially.
Note:
• Available surround mode is depending on the input signal.
e CLEAR button
Press this button to cancel the station-memory setting mode or preset
scan tuning.
r MEMORY button
Press this button to enter the tuner preset memory numbers or station
names.
t TUNING UP / DOWN buttons
Press thses buttons to change the frequency or the preset number.
y F/P (FREQUENCY / PRESET) button
During reception of AM or FM, you can change the function of the UP/
DOWN buttons for scanning frequencies or selecting preset stations
by pressing this button.
!3 !4
e r
AV SURROUND RECEIVER SR4300
CLEAR MEMORY
A/D HT-EQ
PHONES 6.1CH-IN TV DVD
!2 !1
!6
!5
t y u i
TUNING/PRESET F/P MODE
S-DIRECT DIMMER MUTE
VCR1 DSS/VCR2 CDR/MD TAPE CD TUNER
!0
u MODE button
Press this button to select the auto stereo mode or mono mode when
the FM band is selected.
The "AUTO" indicator lights in the auto stereo mode.
i Infrared receiving (IR) sensor window
This window receives infrared signals for the remote control unit.
o VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise
increases the sound level.
!0 INPUT FUNCTION SELECTOR buttons
(AUDIO/ VIDEO)
These buttons are used to select the input sources.
The video function selector, such as TV, DVD, VCR1 and DSS/VCR2,
selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CDR/MD, TUNER, and
6.1CH-IN may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with
a picture from another.
Choose the video source first, and then choose a different audio
source to activate this function.
Press TUNER button to switch the between FM or AM.
!1 6.1CH IN button
Press this button to select the output of an external multi channel decoder.
Press this button again to return the preivious function.
!7
o
VOLUME
DOWN UP