Basic Operation; Before Use; Switching The Sound Mode (Playback Layer); Turning The Power Off - Marantz SA-KI-PEARL-LITE User Manual

Basic operation

Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control
Button only on the main unit
Button only on the remote control
Power
Disc tray
indicator
<ON/STANDBY> <DISC/INPUT>
[S.MODE]
This chapter explains the procedures required to playback a CD,
and the various operations that can be performed during CD
playback.
For other operations, see the sections below.
BUTTON
<BUTTON>
n Playback of MP3 and WMA fi les (vpage 14)
[BUTTON]
n Playback iPod ® (vpage 16)
n Playing a USB memory device (vpage 17)
n Using as a D/A converter (vpage 18)
n Performing menu settings (vpage 19)

Before use

Switching the sound mode (Playback la yer)
Some super audio CD discs have 2 layers. Before playback, perform
the operation below to select the playback layer.
For details on the super audio CD, see "Super audio CD" (vpage 23).
The sound mode can also be set using "SA-CD (Switching sound
[POWER]
mode)" (vpage 20) in the setting menu.
[DISC]
1
Turn the power on.
<ON/STANDBY>
(Press
2
Check that no disc is loaded.
• If the layer is switched while a disc is in the player or the disc tray
is opened,the playback layer switches for that disc, but the top
priority playback layer setting itself does not change.
3
<DISC / INPUT>
Press
media mode to "DISC".
4
[S.MODE]
Press
set (Super Audio CD only).
[Selectable items]
SA-CD : Plays back the 2-channel area of the Super Audio CD
(the default setting).
CD : Plays back the CD layer of the Super Audio CD.
.)
[DISC]
or to set the playback
and switch to the layer you want to
SA-CD CD
• When a disc is loaded after the setting has been made, the contents
recorded on the unit layer are displayed.
• If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
• This setting is stored in the memory and is not cleared even when
the disc holder is opened or closed or the power is turned off. To
change the setting, repeat the procedure above.
If a layer in which nothing is recorded is selected, the other layer that
exists on the disc is played back automatically.
NOTE
Sound mode cannot be changed for discs with only a Super Audio
CD area.

Turning the power off

<ON/STANDBY> or [POWER]
Press .
Power is set to standby and the power indicator lights.
Before setting power to standby, make sure the disc tray is completely
closed.
NOTE
• Do not force the tray in by hand while power is set to standby. This
could cause a trouble.
• Even when power is set to standby, electrical current passes through
some circuits. If you do not intend to use the unit for an extended
period of time, unplug the power cord from the household power
outlet.
ENGLISH
Before use
8 8