Accessing The Installer Menu - LG 26LT670H Setup Manual

Installer Menu
Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pages
20 and 21 for brief descriptions of Installer Menu items. More detailed descriptions follow the table
listing.

Accessing the Installer Menu

1. Turn ON the TV.
If the Automated Installation Routine Wizard appears on the
screen when you turn ON the TV, use the Up/Down arrow keys
on the Installer Remote to select Exit from the Welcome screen,
and press OK to exit the wizard.
2. Using an Installer Remote, press MENU SETTINGS repeatedly
until the on-screen display of the TV setup menus (if the TV is
in Pass-through Mode) or the Function Menu (if the TV is not in
Pass-through Mode) no longer toggles, and then press the
Installer Menu entry sequence (e.g., 9-8-7-6) + OK to access the
Installer Menu.
Note: The default Installer Menu entry sequence is "9876";
however, if Installer Menu item 000 INSTALLER SEQUENCE
has been modified, the entry sequence may be one of three
additional options. See Installer Menu detailed descriptions for
further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
Note: If the password (entry sequence) is not entered or registered correctly, you will see the
message "ENTER PASSWORD 0000" at the top of the screen instead of the Installer Menu
header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will
display.
Note: If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only.
As part of the Installer Menu header, two 3-character acronyms are displayed to indicate the
TV's current configuration mode. The table below lists all possible mode identifiers for these TV
models.
Acronym Description
CPU-CTV Pass-through Mode with Channel Map in CPU
CPU-FTG FTG Mode via CPU
EBL-FTG FTG Mode via EBL
EBL-LNT LodgeNet PPV Mode
MPI-EXT External MPI Control
PTC-CTV Pass-through Mode with Channel Map in PTC
18
xxLT670H PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.009 CPU V3.17.00
Typical Installer Menu
206-4213